Crane pipelay barges
CRANE / DERRICK / PIPELAY BARGES FOR SALE & CHARTER
ALL SUBJECT TO AVAILABILITY / PRIOR SALE OR CHARTER
PLEASE NOTE THAT EVEN THOUGH THERE IS A VERY SMALL LISTING BELOW, WE HAVE ADDITIONAL
OWNERS WHO HAVE INDICATED TO US THAT THEY MAY BE WILLING TO SELL ONE OF THEIR CRANE BARGES ON A CONFIDENTIAL BASIS
IF YOU HAVE AN INTEREST IN A SPECIFIC TYPE AND SIZE OF CRANE BARGE, WE ASK THAT YOU SEND US YOUR EXACT REQUIREMENTS
INQUIRIES WILL ONLY BE ANSWERED IF YOUR COMPLETE FULL DETAILS ARE SUPPLIED WITH THE INQUIRY.

[Home Page][Mail] 



DIRECT FROM OWNER
NEW – UNUSED PIPELAYING EQUIPMENT FOR SALE
CLICK HERE FOR TECHNICAL DETAILS: Technical Specification for Pipelay Equipment.doc
PHOTOS, DETAILS AND PRICE TO NAMED BUYERS



>>>>>>>>>>ALL BELOW EQUIPMENT LISTED BEFORE JANUARY 2016<<<<<<<<<<

SELF-PROPELLED 150 TON CRANE / DIVE SYSTEM VESSEL FOR CHARTER
6 POINT MOORING SYSTEM
ON BOARD SURFACE SUPPLIED AIR DIVE SYSTEM
50 BERTHS - CAN BE INCREASED
FULL DETAILS TO NAMED CHARTERERS WITH FULL CHARTER DETAILS
 
 





SELF-PROPELLED CRANE / ACCOMMODATION BARGE FOR SALE ONLY
Owners price ideas: USD 75 million (May 2016)
Length Overall: 144m
Length between perpendiculars: 131.46m
Breadth: 40m
Depth: 10.75m
Maximum Draft: 7.50m
Light Load Draft: 5.50m
GRT: 21553t
NRT: 6465t
Class: CCS
Self-supporting: 30 days
Speed: 12 knots
Endurance: 5000 nautical miles
Deck strength:  15 tons/m2
Fuel oil: 1950m3
Diesel oil: 380m3
Fresh Water: 466.30m3
Main deck crane:  ZPMC  800 tons
Aux deck crane: CSSC  60 tons
Main engines:  Wartsila AUXPAC 9L20 /1800kw /1000rpm × 6 sets
Generators: CSIC TFJ6711-6SB92/2125KVA(1700kw)/690V/1770A/50Hz/1000rpm X 6 sets
Helideck: 21m / Loading 12 tons
Crew & passenger capacity:  50 berths + 172 berths
 
 


2,000 Ton / DP1 Crane Accommodation Barge for sale
Price ideas region USD 100 million
Additional details to named buyers.
 
Length (L): 149.00 M
Breath (B): 40.00 M
Depth (D): 11.00 M
Max Draft: 6.50 M
Draft In Lifting Operations: 6.30 M
Deadweight: 9673 T
GRT: 23317
NRT: 6995
 
Dynamic Positioning
8 points of anchor positioning methods with 8 single drum winches, 
2,900KN bollard pull each.
Wirerope length is 2,100 M with 66mm diameter.
DP1 Dynamic Positioning System with  4 x 1,250KW Azimuth extendable propeller.
 
Water Depth: 200 Meters
 
Crane
Fixed Position: Main Hook 2,000 Tons / Auxiliary hook 400 Tons
Revolving : Main Hook 1,100 Tons / Auxiliary Hook 400 Tons
 
Accommodation: 238 berths
 
Classification Society:  Germanischer Lloyd
Sailing Area: Unrestricted Area excluding Arctic area
 
Main Engines:  6 X 2,800KW ΦAC 6,600V -  60HZ Φ0.8 (MAN B&W 9L27/38)
Mooring Generator: 1,200KW 3ΦAC450V 60HZΦ0.8 (MAN B&W 6L21/31)
Spare Generator: 315KW 3ΦAC450V 60HZΦ0.8CAT 6L3406
 
Helicopter deck:  Suitable for diameter with 22.4 meters and standard ICAO and CAP437.
 


PIPE LAY BARGE FOR SALE
BUILT 2001
FLAG MALAYSIA
LOA 73.74M
BV CLASS
LOCATION: INDONESIA.
OWNERS ARE KEEN SELLERS AND HAVE NOW REDUCED THEIR PRICE LEVEL.
FULL DETAILS TO NAMED BUYERS
 

 

 

 

 

 




PIPELAY BARGE FOR SALE 

VESSEL NAME:  TBN
CLASSIFICATION:  RMRS, K-ICE 1 BARGE
YEAR BUILT:  2007
DIMENSIONS:  100.6 Х 30.5 Х 6.1 M.
WORKING DRAFT:  2.5 M.
GRT: 5903
 10-ANCHOR POINT BARGE TO LAY UNDERWATER PIPELINES.
IT WAS PARTLY MODERNIZED IN 2010 AND IN 2011 MODERNIZATION WAS FINISHED.
THE BARGE IS FITTED WITH PIPELAYING EQUIPMENT FOR PIPE DIAMETER 4”-60”.
ONE 180T CRANE KOBELKO CKE 2500.
DEPENDING ON PIPELINE CHARACTERISTICS IT CAN BE LAID TO THE DEPTH UP TO 100 M.
TECHNOLOGICAL LINE CONSISTS OF TRANSVERSAL CONVEYOR FOR PIPE RACKING, TWO 75T TENSIONERS, LINE-UP TOOL WITH LINE-UP CLAMP, 4 WELDING STATIONS, REPAIR STATION, 2 COATING STATIONS AND NDT STATION. PIPELAYING PROCESS IS CONTROLLED FROM A CENTRAL PANEL.
INSPECTABLE NORTHERN RUSSIA
 




PIPELAY BARGES FOR SALE
Built                                   : 2008
Class                                  : ABS A1, MODU code attestation
Dim                                    : 112 meters  x 32 meters x 9 meters
Draft                                  : 4.8 meters / 2.1 meters (normal operating / min)
Equipment                       : Pipelay capability 8” to 48” pipe + concrete, capability to 200 meters water depth (8”)
                                             90 ton pipe lay tensioner capacity (30 meters / min)
                                             100 ton pipelay abandonment / recovery winch
                                             Automatic tension transfer system
                                             Pipe conveyor and transfer system rated to 32 ton
                                             5 welding stations with semi-automatic welding stations (STT & flux core)
                                             1 NDT/Weld Repair Station
                                             2 Field joint stations
Stinger Ramp                   : 3° sloping production firing line
                                             34 meters outrigger stinger adaptable to different project requirements
Deck Area                         : 2000 m2 +, 12.5 t / m2 rating, carrying capacity 11000 ton +
Moon Pool                       : 5.5 meters x 5.5 meters
Mooring System              : Single Drum
                                             8 x 90 ton mooring winches (1500 meters / 2” wire)
                                             9 x 10 ton Delta Flipper anchors
Helideck                            : 22.2 meters diameter for Sikorsky S76 and S61
Accommodation             : 292 persons in 1 and 2 person cabin, including galley with seating for 120
                                             Also including cinema, TV room, gym and recreational area.
Location                            : Malaysia
Price                                  : $60 million
 

 

Built                                  : 1998
Class                                  : Lloyds
Dimensions                      : 70.1 meters x 21.34 meters x 3.66 meters
Draft                                  : 1.40 meters min / 2.77 meters maximum
Pipelay method               : Automatic & Manual S-Lay
Pipe Diameter                 : 4” to 52” OD
Tensioner                         : 50 mt - new
A & R Winch                     : 25 mt – Constant Tension 500 meters
Pipe Handling                  : 7 x Longitudinal Conveyors, 2 x Lateral Conveyers, 1 x set Line-up System
Mooring System              : 8 Point Mooring System (Central Control)
Location                            : Malaysia
Asking Price                      : $15 million
 




DIRECT FROM NEW OWNER
DERRICK BARGE FOR SALE OR CHARTER
OWNER PREFERS SALE BUT WILL CONSIDER CHARTER
FULL DETAILS TO NAMED BUYERS / CHARTERERS
COMPLETED DRYDOCKING, CLASS RENEWAL AND REFURBISHMENT JUNE 2014
OWNER ASKING USD 8.5 MILLION (JUNE 2016)
BARGE WORKING SHORT CHARTERS IN THE U.S. GULF
ALL SHOPS, ACCOMMODATIONS AND OTHER FACILITIES LOCATED BELOW DECK.
LARGE MAIN DECK WORKING AREA.


Built 1970 - excellent condition
DIMENSIONS
Length (LOA) 350 feet (106.68 meters)
Width 100 feet (30.48 meters)
Depth 25 feet (7.6 meters)
Operating Draft 11 feet (3.35 meters)
Working Deck Area 20,000 square feet (6,096 square meters)
Classification Germanischer Lloyd
HELIDECK
Dimensions 49 x 46 feet (14.94 x 14.02 meters)
Load Capacity 11,000 pounds
 
ACCOMMODATIONS & STORAGE CAPACITY
Living Space 110 person quarters
Fuel Capacity 338,661 gallons
Fresh Water Capacity 507,053 gallons
 
MOORING EQUIPMENT
Anchors (8) - Capacity 12,000 pounds - Type Delta Flipper
Winches - Quantity (8) - Type Intercon Single Drum - Capacity 200,000 pounds
Wire - Diameter 2 inch - Length 5,000 feet
 
AUXILIARY EQUIPMENT
Main Generator (3) 750 kW, 480 volt, 3-phase, 60 HZ
Emergency Generator (1) 125 kW, 480 volt, 3 phase, 60 HZ
Electric Compressors (2) Electric 750 CFM
 
MAIN CRANE
Make AMCLYDE -  Model 509 - Type Revolving
Boom Length - Main 200 feet (61 meters)
Main Fixed 615 short tons @ 65-foot radius (558 MT @ 20 meters radius)
Main Revolving 615 short tons @ 65-foot radius (558 MT @ 20 meters radius)
 
Auxiliary 230 feet (70 meters)
Auxiliary 135 short tons @ 175-foot radius (123 MT @ 53 meters radius)
 
Whip 245 feet (75 meters)
Whip 50 short tons @ 265-foot radius (45 MT @ 81 meters radius)
 
DECK EQUIPMENT
Deck Crane - Make Manitowoc - Model 3900W/S2 - Type Crawler
Boom - Length 120 foot main - Capacity 60 short tons
 
Compressor - Diesel (1) 750 CFM
 
Jet Pumps - Diesel (1) 6x6
 
COMMUNICATIONS
Radios
Fixed VHF (4)
Portable VHF (12)
Telephones
V-Sat (4) lines communication/Internet
Digital (1) backup
 
ADDITIONAL EQUIPMENT:
400 Ton - Sub-Sea Lift Winch Addition
We are is pleased to announce that addition of two 200 ton deck winches allowing us to
perform 400 ton Sub-Sea lifts in water depths up to approximately 1,000’.
The winches can be utilized either individually for up to 200 ton lifts or in tandem for up to 400 ton lifts with or without utilizing the spreader bar specifically designed for use with this system.
The Design of the Side Lift Winch Addition was performed and Stamped by a
Licensed Naval Architect and the design and installation is Approved/Classed by DNV-GL.
 
Advantages/Capabilities
1.    Lifting components from a cargo barge or OSV utilizing the Main crane and handing off to the Sub-Sea Winch system and lowering to its final Sub-Sea position.
2.    Lifting components from the sea floor or current Sub-Sea position and bringing them to the surface, handing off to the Main crane and loading onto a barge or OSV for transport.
3.    Lifting smaller jacket sections cut from deeper water structures and bringing them to the surface. This allows for less diver in the water time and less rigging time as sections are lifted from their deep water positions onto the waiting cargo barge.
4.    Able to utilize the system to lay over structures from the vertical to the horizontal position for loading onto cargo barges during removals with less risk of damage.



230 BERTH PIPELAY BARGE AVAILABLE FOR CHARTER
 Pipelay Barge AVAILABLE FOR CHARTER.doc




PIPELAY BARGE FOR SALE
SPECIFICATIONS: PIPELAY BARGE FOR SALE.doc



Accommodation Crane Barge With 1000t Crane For Sale
Can Be Converted To DP2 In 3 To 4 Months
Price Ideas USD 30 Million.
Additional Details to NAMED Buyers
Built China 2010.
CCS CLASS.
Loa 99.13m x Lbp 97.85m x Beam 42.20m x Depth 7.6m x Designed Draft 4.5m

Boom Length 61m
Crane Base Diameter 17m

Generator Set 900kw X 3 (750rpm 50hz 400v, 1180a)
Generator Set 350kw X 1 (1500rpm 50hz, 400v, 651a)
Generator Set   30kw X 1

Accommodations:
Main Deck
Galley X 1
Big Mess Room X 1 Small Mess Room X 1
2 Men Room X 1
4 Men Room X 4
6 Men Room X 2
Common Bathroom X 1
Common Toilet X 1
Laundry Room X 1

Deck 1
Entertaining / Meeting Room X 1
1 Men Room X 3
4 Men Room X 6
6 Men Room X 2
Common Bathroom X 1
Storeroom X 2
Hot Water Room X 1
Switch Room X 1

Deck 2
1 Men Room X 3
4 Men Room X 7
5 Men Room X 2
6 Men Room X 3
Common Bathroom X 1
Common Toilet X 1
Office Room X 2
Hot Water Room X 1
Switch Room X 1

Deck 3
1 Men Room X 1
4 Men Room X 1
Toilet X 1

Total 133 Men





PIPELAYING BARGE
Owners will discuss all options:
-  Project bidding for pipelay and heavy lift work.
-  Chartering the vessel to a contractor.
-  Lease/purchase of the vessel to a contractor.
-  Outright purchase of the vessel.
OWNER ASKING PRICE USD 210 MILLION
FULL DETAILS TO NAMED CHARTERERS / BUYERS
 
Classification: ABS / А1 derrick / pipelaying barge with ballast system
Year built: 2010
Builder: Shanghai Zhenhua Heavy Industry Co. Ltd.
Year modernized: 2011
Port of Registry: Hong Kong
Dimensions (L х W х H): 169 х 46 х 13.5 m.
Working draft:  5.0 – 6.5 m.
Operating draft minimum /maximum  5.0 - 6.5 / 9 m
12-point anchor barge to lay underwater pipelines.
The barge is fitted with a 1,600T crane, pipelaying equipment for pipe diameter 4”-60”
   one 250T crane KOBELKO CKE 2500 and pedestal portside 40T crane.
Depending on the pipeline characteristics it can be laid to the depth up to 200 m.
Technological line consists of transversal and longitudinal conveyors for pipe racking,
   two 100T tensioners, line-up tool with line-up clamp, 6 welding stations, repair station,
2 coating stations and NDT station.
Pipelaying process is controlled from the central panel.
The barge is also equipped with 6 davit cranes, 2x90T, 4x75T) to perform tie-ins.
 If necessary, the barge can be equipped with a 2,500 to 3,000T pedestal crane.

  

SAME OWNER HAS DP2 MULTI-SERVICE DIVE SUPPORT VESSEL AVAILABLE
FULL DETAILS TO NAMED CHARTERERS / BUYERS
 
Classification: KM* Arc4 ff-1 tag supply vessel
Year Built/Modernized: 1985/2005/2011
Shipyard: Szczecin Shipyard Poland
Dimensions (L х W х H): 81.37 х 16.3 х 7.2 m
Deadweight: 1,400 t.
Crane: 20 ton capacity
Bollard pull: max 84 tons
Main Engines: 2 х 6ZL40/48 Тotal 7,200 bhp
Speed: 12 knots
GRT/NRT: 2737/822
DP2 system
Maximum / run speed 15 / 13 knots
 
Saturation Diving System 300
Certification: IMCA, DNV, RMRS
Manufacturer Lexmar, Singapore
Maximum water depth  300m
Low-pressure chamber  9 divers
Man Bell 3 divers
 
ROV TRITON XLX 150HP
Depth Rating 3,050m
Hydraulic Power 150 HP
In Air Weight 4,800kg
Dimensions 3,226 x 1,803 x 1,940mm
Lateral Bollard Pull 1,100 kg
Vertical Bollard Pull 900 kg
Forward / Aft Bollard Pull 1,100 kg
Manipulator 5 functional PSSL TA60 / 7 functional Schilling Titan 4
Payload 250 kg




DERRICK BARGE / PIPELAY BARGE FOR SALE
OWNERS ARE INVITING BEST OFFERS – KEEN SELLERS.
THE BARGE IS CURRENTLY AVAILABLE FAR EAST FOR INSPECTION.
 
PANAMA FLAG
BUILT 1974 - JAPAN
CLASS: ABS +A1, BARGE
 
DIMENSIONS:
LOA 456 X BEAM 99 X DEPTH 30 FEET
OPERATING DRAFT:  11.8 FEET MINIMUM
                                          17.0 FEET MAXIMUM
 
CAPACITIES:
FUEL:  450,132 U.S. GALLONS
BALLAST WATER: 1,869,691 U.S. GALLONS
FRESH WATER: 441,230 U.S. GALLONS
LUBE OIL: 16,000 U.S. GALLONS
 
ACCOMMODATIONS: 285 BERTHS (AIR CONDITIONED & HEATED)
 
CRANES:
MAIN CRANE: AMERICAN MODEL 509
BOOM LENGTH: 195 FEET
BOOM LENGTH WHIP: 285 FEET
MAIN HOOK FIXED:           660 SHORT TONS
MAIN HOOK REVOLVING: 600 SHORT TONS
 
AUXILIARY CRANE:
BOOM LENGTH:  225 FEET
AUX WHIP: 50 SHORT TONS
AUX CAPACITY: 125 SHORT TONS
 
DECK CRANE:
1 X MANITOWOC 4000W CRAWLER CRANE
 
PIPELAY EQUIPMENT:
4 INCH MINIMUM - 60 INCHES MAXIMUM
TENSION MACHINE:  2 @ 150 KIP
TENSION CAPACITY: 300 KIP
MINIMUM WATER DEPTH:  18 FEET
MAXIMUM WATER DEPTH:  CASE BY CASE
 
EQUIPMENT:
AIR COMPRESSOR:  1 @ 600 CFM + 2 @ 650 CFM ELECTRIC
JET PUMP: 1 @ DIESEL 1,200 GPM
WELDING MACHINE: MANUAL & AUTOMATIC
BOILERS: 600 HP - 22,000 LBS. STEAM/HOUR @ 175 PSI
ANTI POLLUTION: OIL SPILL RESPONSE KIT
WATER MAKER:  2 @ 32,000 US GALLONS/DAY
HELIDECK: 70 FEET X 70 FEET
 
 



HIGH SPEC BARGE EQUIPPED FOR SEVERAL OFFSHORE WORKS
CRANED ACCOMMODATION BARGE RORO / ROV / PIPELAYER
OWNERS IDEAS ON REQUEST
FULL DETAILS TO NAMED BUYERS.
 
BUILT 2007
CLASS RINA
HULL CATAMARAN TYPE SELF PROPELLED
DIMENSIONS  60M X 16,1M X 4,6M X DRAFT 2,5M
FREE DECK AREA  500 SQM + 50M COVERED
MAIN ENGINES  CAT 3412E  2X 552KW
SPEED 9 KNOTS
BOWTHRUSTER  300KW
MAIN CRANE:  LIEBHERR HS895HD-200 TONS FULLY EQUIPPED (SEE ATTACHMENT)
SERVICE CRANE: TIRED 20 TONS
ACCOMMODATION FOR 8 CREW MEMBERS + 20 TECHNICIANS.
FITTED WITH STINGER FOR PIPE WELDING.
FITTED WITH 4 HYDRAULIC ANCHORAGE PILES
FITTED WITH VEHICLE RAMP
FITTED WITH 4 TANKS RECLAIMED OIL (500 CBM)
ROV FITTED - DGPS RADIO SAT POSITIONING SYSTEM
 



Pipelay barge for sale – possible charter.

The pipelay equipment has been removed but is available on shore.

Asking price has been reduced to US$ 7.7 million “as is, where is” Far East port.

Full details can be sent on request.

 

 

  

 




HEAVY-LIFT 1,500 TON REVOLVING CRANE BARGE AVAILABLE
FULL DETAILS available TO NAMED inquiries
 
BUILT 2012
CLASS BV – I HULL MACH, BARGE, UNRESTRICTED NAVIGATION
(CERTIFICATES  ITC – ILLC – SCTC – AIFSC – IOPPC – IAPPC – EIAPPC )
 
DIMENSIONS 136 X 36 X 8 X 3 METERS OPERATING DRAFT (446’ X 118’ X 26’ X 10’)
DWT 18,000 TONS
GRT 10873
 
4 POINT MOORING SYSTEM
ANCHORS 4 X 5200kg FLIPPER DELTA
 
GENERATORS CUMMINS 150KW – 415V/3/50HZ ELECTRIC STARTING
 
COMPLETE BALLAST SYSTEM - BALLAST PUMPS 2 X 800m3/HOUR
 
ACCOMMODATIONS ARE INTERCHANGABLE FOR 40 OR MORE PERSONS
 
500 TONS FUEL CAPACITY
 
REVOLVING PEDESTAL CRANE – DOUBLE BOOM – 1,500 TONS CAPACITY
         
COMPLETE SPECIFICATIONS
 
 

  • newbuild - 400 BERTH ACCOMMODATION / 300 TON CRANE BARGE
    LENGTH: 120MLENGTH: 120M  X  BREADTH: 31.7M X  DEPTH: 9M X DRAFT: 6M
    CLASS: BV
    MAKER’S LIST AVAILABLE
    GA ATTACHED
    GA SHOWS 300 BERTH PIPELAY BARGE / 350 BERTH BUT PIPELAY EQUIPMENT NOT INSTALLED/BERTHS INCREASED.
    PRICE - AUGUST 2015 - REGION USD 34 MILLION (SUBJECT TO RECONFIRMATION)
     GA - P2736-101-00-E0.pdf.pdf
     

  • 300 BERTH NEWBUILD ACCOMMODATION WORK BARGE FOR SALE
    BUILT 2013
    PRICE ON REQUEST
    DECK CRANE SUPPLIED SEPARATELY ACCORDING TO BUYER’S SPECIFICATIONS
    SEE ATTACHMENTS FOR ADDITIONAL DETAILS
     
     

     

    DERRICK PIPELAY BARGE FOR CHARTER
    300 BERTHS
    PIPELAY 6” TO 36”
    700 TON REVOLVING CRANE
    8 POINT MOORING
    FULL DETAILS TO NAMED, CHECKABLE BUYERS / CHARTERERS
     

      


     Send E-Mail to MARINE TRANSPORTATION CONSULTANTS